dmesg - AMD Ryzen 5 2600X Six-Core

Return To AMD Ryzen 5 2600X Six-Core System Information

Linux version 5.8.0-44-generic (buildd@lgw01-amd64-054) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #50~20.04.1-Ubuntu SMP Wed Feb 10 21:07:30 UTC 2021 (Ubuntu 5.8.0-44.50~20.04.1-generic 5.8.18)
Command line: BOOT_IMAGE=/vmlinuz-5.8.0-44-generic root=/dev/mapper/vgubuntu-root ro quiet splash amdgpu.ppfeaturemask=0xffffffff vt.handoff=7
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000da014fff] usable
BIOS-e820: [mem 0x00000000da015000-0x00000000db4fcfff] reserved
BIOS-e820: [mem 0x00000000db4fd000-0x00000000db5b2fff] ACPI data
BIOS-e820: [mem 0x00000000db5b3000-0x00000000db6befff] usable
BIOS-e820: [mem 0x00000000db6bf000-0x00000000dba7cfff] ACPI NVS
BIOS-e820: [mem 0x00000000dba7d000-0x00000000dc581fff] reserved
BIOS-e820: [mem 0x00000000dc582000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.1.1 present.
DMI: System manufacturer System Product Name/ROG STRIX B450-F GAMING, BIOS 1201 12/07/2018
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x81f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFE0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000820000000 aka 33280M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
RAMDISK: [mem 0x2d377000-0x329b2fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DB50A098 0000AC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DB518778 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200528/tbfadt-615)
ACPI: DSDT 0x00000000DB50A1E0 00E595 (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x00000000DBA65D80 000040
ACPI: APIC 0x00000000DB518890 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DB518970 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x00000000DB5189B8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000DB518A58 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DB5216F0 001A58 (v01 AMD    AMD CPU  00000001 AMD  00000001)
ACPI: CRAT 0x00000000DB523148 000BD0 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
ACPI: CDIT 0x00000000DB523D18 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
ACPI: SSDT 0x00000000DB523D48 002DA8 (v01 AMD    AMD AOD  00000001 INTL 20120913)
ACPI: MCFG 0x00000000DB526AF0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: SSDT 0x00000000DB528890 0000BF (v01 AMD    AMD PT   00001000 INTL 20120913)
ACPI: HPET 0x00000000DB526B88 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: SSDT 0x00000000DB526BC0 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
ACPI: UEFI 0x00000000DB526BE8 000042 (v01                 00000000      00000000)
ACPI: WPBT 0x00000000DB526C30 00003C (v01 ALASKA A M I    00000001 ASUS 00000001)
ACPI: IVRS 0x00000000DB526C70 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
ACPI: SSDT 0x00000000DB526D40 001B4E (v01 AMD    AmdTable 00000001 INTL 20120913)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081f37ffff]
NODE_DATA(0) allocated [mem 0x81f356000-0x81f37ffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000081f37ffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009cfff]
  node   0: [mem 0x0000000000100000-0x0000000009cfffff]
  node   0: [mem 0x000000000a000000-0x000000000a1fffff]
  node   0: [mem 0x000000000a20a000-0x000000000affffff]
  node   0: [mem 0x000000000b020000-0x00000000da014fff]
  node   0: [mem 0x00000000db5b3000-0x00000000db6befff]
  node   0: [mem 0x00000000dc582000-0x00000000deffffff]
  node   0: [mem 0x0000000100000000-0x000000081f37ffff]
Zeroed struct page in unavailable ranges: 17519 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff]
On node 0 totalpages: 8371089
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 14050 pages used for memmap
  DMA32 zone: 899189 pages, LIFO batch:63
  Normal zone: 116686 pages used for memmap
  Normal zone: 7467904 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 4 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a209fff]
PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: hibernation: Registered nosave memory: [mem 0xda015000-0xdb4fcfff]
PM: hibernation: Registered nosave memory: [mem 0xdb4fd000-0xdb5b2fff]
PM: hibernation: Registered nosave memory: [mem 0xdb6bf000-0xdba7cfff]
PM: hibernation: Registered nosave memory: [mem 0xdba7d000-0xdc581fff]
PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfd0fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd100000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
Built 1 zonelists, mobility grouping on.  Total pages: 8240268
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-5.8.0-44-generic root=/dev/mapper/vgubuntu-root ro quiet splash amdgpu.ppfeaturemask=0xffffffff vt.handoff=7
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 32719956K/33484356K available (14339K kernel code, 2537K rwdata, 5388K rodata, 2640K init, 4920K bss, 764400K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 46218 entries in 181 pages
ftrace: allocated 181 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
	Trampoline variant of Tasks RCU enabled.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200528
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 3593.518 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33cc685a193, max_idle_ns: 440795362684 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7187.03 BogoMIPS (lpj=14374072)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Vulnerable
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 5 2600X Six-Core Processor (family: 0x17, model: 0x8, stepping: 0x2)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 12 processors activated (86244.43 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xdb6bf000-0xdba7cfff] (3923968 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 09:17:39, date: 2021-03-13
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
NET: Registered protocol family 16
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1615627058.176:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xefff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: enabling Extended Tags
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [1022:43d5] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601
pci 0000:01:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff]
pci 0000:01:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:01:00.1: PME# supported from D3hot D3cold
pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400
pci 0000:01:00.2: enabling Extended Tags
pci 0000:01:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 01-07]
pci 0000:00:01.3:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.3:   bridge window [mem 0xfe700000-0xfe8fffff]
pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:01.0: [1022:43c7] type 01 class 0x060400
pci 0000:02:01.0: enabling Extended Tags
pci 0000:02:01.0: PME# supported from D3hot D3cold
pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400
pci 0000:02:04.0: enabling Extended Tags
pci 0000:02:04.0: PME# supported from D3hot D3cold
pci 0000:02:06.0: [1022:43c7] type 01 class 0x060400
pci 0000:02:06.0: enabling Extended Tags
pci 0000:02:06.0: PME# supported from D3hot D3cold
pci 0000:02:07.0: [1022:43c7] type 01 class 0x060400
pci 0000:02:07.0: enabling Extended Tags
pci 0000:02:07.0: PME# supported from D3hot D3cold
pci 0000:01:00.2: PCI bridge to [bus 02-07]
pci 0000:01:00.2:   bridge window [io  0xe000-0xefff]
pci 0000:01:00.2:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:03:00.0: [8086:1539] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfe700000-0xfe71ffff]
pci 0000:03:00.0: reg 0x18: [io  0xe000-0xe01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xfe720000-0xfe723fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:02:00.0:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:04.0: PCI bridge to [bus 05]
pci 0000:02:06.0: PCI bridge to [bus 06]
pci 0000:02:07.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [1002:1478] type 01 class 0x060400
pci 0000:08:00.0: reg 0x10: [mem 0xfe600000-0xfe603fff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:03.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:00:03.1: PCI bridge to [bus 08-0a]
pci 0000:00:03.1:   bridge window [io  0xd000-0xdfff]
pci 0000:00:03.1:   bridge window [mem 0xfe500000-0xfe6fffff]
pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:09:00.0: [1002:1479] type 01 class 0x060400
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PCI bridge to [bus 09-0a]
pci 0000:08:00.0:   bridge window [io  0xd000-0xdfff]
pci 0000:08:00.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:08:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:0a:00.0: [1002:731f] type 00 class 0x030000
pci 0000:0a:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:0a:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:0a:00.0: reg 0x20: [io  0xd000-0xd0ff]
pci 0000:0a:00.0: reg 0x24: [mem 0xfe500000-0xfe57ffff]
pci 0000:0a:00.0: reg 0x30: [mem 0xfe580000-0xfe59ffff pref]
pci 0000:0a:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:0a:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:03.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:0a:00.1: [1002:ab38] type 00 class 0x040300
pci 0000:0a:00.1: reg 0x10: [mem 0xfe5a0000-0xfe5a3fff]
pci 0000:0a:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0:   bridge window [io  0xd000-0xdfff]
pci 0000:09:00.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:09:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:0b:00.0: [1022:145a] type 00 class 0x130000
pci 0000:0b:00.0: enabling Extended Tags
pci 0000:0b:00.2: [1022:1456] type 00 class 0x108000
pci 0000:0b:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
pci 0000:0b:00.2: reg 0x24: [mem 0xfe400000-0xfe401fff]
pci 0000:0b:00.2: enabling Extended Tags
pci 0000:0b:00.3: [1022:145f] type 00 class 0x0c0330
pci 0000:0b:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
pci 0000:0b:00.3: enabling Extended Tags
pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:00:07.1:   bridge window [mem 0xfe200000-0xfe4fffff]
pci 0000:0c:00.0: [1022:1455] type 00 class 0x130000
pci 0000:0c:00.0: enabling Extended Tags
pci 0000:0c:00.2: [1022:7901] type 00 class 0x010601
pci 0000:0c:00.2: reg 0x24: [mem 0xfe908000-0xfe908fff]
pci 0000:0c:00.2: enabling Extended Tags
pci 0000:0c:00.2: PME# supported from D3hot D3cold
pci 0000:0c:00.3: [1022:1457] type 00 class 0x040300
pci 0000:0c:00.3: reg 0x10: [mem 0xfe900000-0xfe907fff]
pci 0000:0c:00.3: enabling Extended Tags
pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1:   bridge window [mem 0xfe900000-0xfe9fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x2
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
iommu: Default domain type: Translated 
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:0a:00.0: vgaarb: setting as boot VGA device
pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:0a:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xda015000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb6bf000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x02a0-0x02af] has been reserved
system 00:02: [io  0x0230-0x023f] has been reserved
system 00:02: [io  0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: [io  0x040b] has been reserved
system 00:04: [io  0x04d6] has been reserved
system 00:04: [io  0x0c00-0x0c01] has been reserved
system 00:04: [io  0x0c14] has been reserved
system 00:04: [io  0x0c50-0x0c51] has been reserved
system 00:04: [io  0x0c52] has been reserved
system 00:04: [io  0x0c6c] has been reserved
system 00:04: [io  0x0c6f] has been reserved
system 00:04: [io  0x0cd0-0x0cd1] has been reserved
system 00:04: [io  0x0cd2-0x0cd3] has been reserved
system 00:04: [io  0x0cd4-0x0cd5] has been reserved
system 00:04: [io  0x0cd6-0x0cd7] has been reserved
system 00:04: [io  0x0cd8-0x0cdf] has been reserved
system 00:04: [io  0x0800-0x089f] has been reserved
system 00:04: [io  0x0b00-0x0b0f] has been reserved
system 00:04: [io  0x0b20-0x0b3f] has been reserved
system 00:04: [io  0x0900-0x090f] has been reserved
system 00:04: [io  0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:02:00.0:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:04.0: PCI bridge to [bus 05]
pci 0000:02:06.0: PCI bridge to [bus 06]
pci 0000:02:07.0: PCI bridge to [bus 07]
pci 0000:01:00.2: PCI bridge to [bus 02-07]
pci 0000:01:00.2:   bridge window [io  0xe000-0xefff]
pci 0000:01:00.2:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:01.3: PCI bridge to [bus 01-07]
pci 0000:00:01.3:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.3:   bridge window [mem 0xfe700000-0xfe8fffff]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0:   bridge window [io  0xd000-0xdfff]
pci 0000:09:00.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:09:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:08:00.0: PCI bridge to [bus 09-0a]
pci 0000:08:00.0:   bridge window [io  0xd000-0xdfff]
pci 0000:08:00.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:08:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 08-0a]
pci 0000:00:03.1:   bridge window [io  0xd000-0xdfff]
pci 0000:00:03.1:   bridge window [mem 0xfe500000-0xfe6fffff]
pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:00:07.1:   bridge window [mem 0xfe200000-0xfe4fffff]
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1:   bridge window [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xefff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:08: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xfe500000-0xfe6fffff]
pci_bus 0000:08: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:09: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:09: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:0a: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:0b: resource 1 [mem 0xfe200000-0xfe4fffff]
pci_bus 0000:0c: resource 1 [mem 0xfe900000-0xfe9fffff]
pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:0a:00.1: D0 power state depends on 0000:0a:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 88304K
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.3: Adding to iommu group 1
pci 0000:00:02.0: Adding to iommu group 2
pci 0000:00:03.0: Adding to iommu group 3
pci 0000:00:03.1: Adding to iommu group 4
pci 0000:00:04.0: Adding to iommu group 5
pci 0000:00:07.0: Adding to iommu group 6
pci 0000:00:07.1: Adding to iommu group 7
pci 0000:00:08.0: Adding to iommu group 8
pci 0000:00:08.1: Adding to iommu group 9
pci 0000:00:14.0: Adding to iommu group 10
pci 0000:00:14.3: Adding to iommu group 10
pci 0000:00:18.0: Adding to iommu group 11
pci 0000:00:18.1: Adding to iommu group 11
pci 0000:00:18.2: Adding to iommu group 11
pci 0000:00:18.3: Adding to iommu group 11
pci 0000:00:18.4: Adding to iommu group 11
pci 0000:00:18.5: Adding to iommu group 11
pci 0000:00:18.6: Adding to iommu group 11
pci 0000:00:18.7: Adding to iommu group 11
pci 0000:01:00.0: Adding to iommu group 12
pci 0000:01:00.1: Adding to iommu group 12
pci 0000:01:00.2: Adding to iommu group 12
pci 0000:02:00.0: Adding to iommu group 12
pci 0000:02:01.0: Adding to iommu group 12
pci 0000:02:04.0: Adding to iommu group 12
pci 0000:02:06.0: Adding to iommu group 12
pci 0000:02:07.0: Adding to iommu group 12
pci 0000:03:00.0: Adding to iommu group 12
pci 0000:08:00.0: Adding to iommu group 13
pci 0000:09:00.0: Adding to iommu group 14
pci 0000:0a:00.0: Adding to iommu group 15
pci 0000:0a:00.1: Adding to iommu group 16
pci 0000:0b:00.0: Adding to iommu group 17
pci 0000:0b:00.2: Adding to iommu group 18
pci 0000:0b:00.3: Adding to iommu group 19
pci 0000:0c:00.0: Adding to iommu group 20
pci 0000:0c:00.2: Adding to iommu group 21
pci 0000:0c:00.3: Adding to iommu group 22
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada):
 PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.3: AER: enabled with IRQ 26
pcieport 0000:00:03.1: AER: enabled with IRQ 27
pcieport 0000:00:07.1: AER: enabled with IRQ 28
pcieport 0000:00:08.1: AER: enabled with IRQ 30
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 2560x1440x32, linelength=10240, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0x000000001545adb3, using 14400k, total 14400k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
ACPI: \_PR_.P000: Found 2 idle states
ACPI: \_PR_.P001: Found 2 idle states
ACPI: \_PR_.P002: Found 2 idle states
ACPI: \_PR_.P003: Found 2 idle states
ACPI: \_PR_.P004: Found 2 idle states
ACPI: \_PR_.P005: Found 2 idle states
ACPI: \_PR_.P006: Found 2 idle states
ACPI: \_PR_.P007: Found 2 idle states
ACPI: \_PR_.P008: Found 2 idle states
ACPI: \_PR_.P009: Found 2 idle states
ACPI: \_PR_.P00A: Found 2 idle states
ACPI: \_PR_.P00B: Found 2 idle states
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: setting system clock to 2021-03-13T09:17:39 UTC (1615627059)
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: microcode updated early to new patch_level=0x0800820d
microcode: CPU0: patch_level=0x0800820d
microcode: CPU1: patch_level=0x0800820d
microcode: CPU2: patch_level=0x0800820d
microcode: CPU3: patch_level=0x0800820d
microcode: CPU4: patch_level=0x0800820d
microcode: CPU5: patch_level=0x0800820d
microcode: CPU6: patch_level=0x0800820d
microcode: CPU7: patch_level=0x0800820d
microcode: CPU8: patch_level=0x0800820d
microcode: CPU9: patch_level=0x0800820d
microcode: CPU10: patch_level=0x0800820d
microcode: CPU11: patch_level=0x0800820d
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (438215471, -35996253)->(564780098, -162560880)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: a3e9eb9032099963d398e4d4d5991ce491952397'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 13:629:272
acpi_cpufreq: overriding BIOS provided _PSD data
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2640K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 756K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
  with arguments:
    /init
    splash
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=/vmlinuz-5.8.0-44-generic
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
dca service started, version 1.12.1
ahci 0000:01:00.1: version 3.0
ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 43
ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 43
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 43
ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 43
ata7: DUMMY
ata8: DUMMY
ahci 0000:0c:00.2: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0xc impl SATA mode
ahci 0000:0c:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
scsi host11: ahci
ata9: DUMMY
ata10: DUMMY
ata11: SATA max UDMA/133 abar m4096@0xfe908000 port 0xfe908200 irq 47
ata12: SATA max UDMA/133 abar m4096@0xfe908000 port 0xfe908280 irq 48
xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.8.0-44-generic xhci-hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT5._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT6._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT7._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT8._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT9._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO10._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO11._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO12._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO13._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO14._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.8.0-44-generic xhci-hcd
usb usb2: SerialNumber: 0000:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT1._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT2._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT3._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT4._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20200528/psparse-529)
xhci_hcd 0000:0b:00.3: xHCI Host Controller
xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0b:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.8.0-44-generic xhci-hcd
usb usb3: SerialNumber: 0000:0b:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:0b:00.3: xHCI Host Controller
xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:0b:00.3: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.8.0-44-generic xhci-hcd
usb usb4: SerialNumber: 0000:0b:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
pps pps0: new PPS source ptp0
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:9d:92:8a:ce:21
igb 0000:03:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:03:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:03:00.0 enp3s0: renamed from eth0
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel 
[drm] amdgpu kernel modesetting enabled.
amdgpu: Ignoring ACPI CRAT on non-APU system
Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
checking generic (e0000000 e10000) vs hw (e0000000 10000000)
fb0: switching to amdgpudrmfb from VESA VGA
amdgpu 0000:0a:00.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (NAVI10 0x1002:0x731F 0x1043:0x0583 0xC4).
amdgpu 0000:0a:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[drm] register mmio base: 0xFE500000
[drm] register mmio size: 524288
[drm] add ip block number 0 
[drm] add ip block number 1 
[drm] add ip block number 2 
[drm] add ip block number 3 
[drm] add ip block number 4 
[drm] add ip block number 5 
[drm] add ip block number 6 
[drm] add ip block number 7 
[drm] add ip block number 8 
[drm] add ip block number 9 
amdgpu 0000:0a:00.0: No more image in the PCI ROM
amdgpu: ATOM BIOS: 115-D199PI0-100
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:0a:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used)
amdgpu 0000:0a:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[drm] Detected VRAM RAM=8176M, BAR=256M
[drm] RAM width 256bits GDDR6
[TTM] Zone  kernel: Available graphics memory: 16440850 KiB
[TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 8176M of VRAM memory ready
[drm] amdgpu: 8176M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x0000008000E10000).
[drm] Found VCN firmware Version ENC: 1.10 DEC: 5 VEP: 0 Revision: 13
[drm] PSP loading VCN firmware
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using xhci_hcd
ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata12.00: NCQ Send/Recv Log not supported
ata12.00: ATA-9: Samsung SSD 840 Series, DXT08B0Q, max UDMA/133
ata12.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata12.00: NCQ Send/Recv Log not supported
ata12.00: configured for UDMA/133
ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata11.00: ATA-11: WDC  WDS100T2B0A-00SM50, 411030WD, max UDMA/133
ata11.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata11.00: configured for UDMA/133
usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB 2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.01
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: 4-Port USB 3.1 Hub
usb 2-1: Manufacturer: Generic
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
[drm] reserve 0x900000 from 0x81fe400000 for PSP TMR
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: M4-CT256M4SSD2, 000F, max UDMA/100
ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access     ATA      M4-CT256M4SSD2   000F PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-4: new full-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3593.249 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb698e952, max_idle_ns: 440795267109 ns
clocksource: Switched to clocksource tsc
 sda: sda1 sda2 < sda5 sda6 >
sd 1:0:0:0: [sda] Attached SCSI disk
amdgpu 0000:0a:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu: use vbios provided pptable
amdgpu: smc_dpm_info table revision(format.content): 4.5
amdgpu: smu driver if version = 0x00000036, smu fw if version = 0x00000037, smu fw version = 0x002a3d00 (42.61.0)
amdgpu: SMU driver if version not matched
amdgpu: SMU is initialized successfully!
[drm] Display Core initialized with v3.2.84!
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-4: New USB device found, idVendor=0b05, idProduct=17cb, bcdDevice= 1.12
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: BCM20702A0
usb 1-4: Manufacturer: Broadcom Corp
usb 1-4: SerialNumber: 5CF3706434C1
usb 1-1.1: new full-speed USB device number 4 using xhci_hcd
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
kfd kfd: Allocated 3969056 bytes on gart
Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x731f:0x1002]
kfd kfd: added device 1002:731f
amdgpu 0000:0a:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 10, active_cu_number 36
[drm] fb mappable at 0xE0FDA000
[drm] vram apper at 0xE0000000
[drm] size 19906560
[drm] fb depth is 24
[drm]    pitch is 13824
fbcon: amdgpudrmfb (fb0) is primary device
fbcon: Deferring console take-over
amdgpu 0000:0a:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:0a:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
amdgpu 0000:0a:00.0: amdgpu: ring vcn_dec uses VM inv eng 0 on hub 1
amdgpu 0000:0a:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 1 on hub 1
amdgpu 0000:0a:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 4 on hub 1
amdgpu 0000:0a:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1
[drm] Initialized amdgpu 3.38.0 20150101 for 0000:0a:00.0 on minor 0
ata6: SATA link down (SStatus 0 SControl 300)
scsi 10:0:0:0: Direct-Access     ATA      WDC  WDS100T2B0A 30WD PQ: 0 ANSI: 5
sd 10:0:0:0: Attached scsi generic sg1 type 0
sd 10:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 11:0:0:0: Direct-Access     ATA      Samsung SSD 840  8B0Q PQ: 0 ANSI: 5
sd 11:0:0:0: Attached scsi generic sg2 type 0
ata12.00: Enabling discard_zeroes_data
sd 11:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 11:0:0:0: [sdc] Write Protect is off
sd 11:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 11:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata12.00: Enabling discard_zeroes_data
 sdc: sdc1
 sdb: sdb1
ata12.00: Enabling discard_zeroes_data
sd 11:0:0:0: [sdc] Attached SCSI disk
sd 10:0:0:0: [sdb] Attached SCSI disk
usb 1-1.1: New USB device found, idVendor=4348, idProduct=55e0, bcdDevice= 1.00
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1.2: new high-speed USB device number 5 using xhci_hcd
usb 1-1.2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.01
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: 4-Port USB 2.1 Hub
usb 1-1.2: Manufacturer: Generic
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 4 ports detected
[drm:dpcd_set_source_specific_data [amdgpu]] *ERROR* Error in DP aux read transaction, not writing source specific data
usb 1-1.2.1: new full-speed USB device number 6 using xhci_hcd
usb 1-1.2.1: New USB device found, idVendor=1d50, idProduct=6122, bcdDevice= 1.01
usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.1: Product: Ultimate Hacking Keyboard
usb 1-1.2.1: Manufacturer: Ultimate Gadget Laboratories
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:1D50:6122.0001: hiddev0,hidraw0: USB HID v1.10 Device [Ultimate Gadget Laboratories Ultimate Hacking Keyboard] on usb-0000:01:00.0-1.2.1/input0
input: Ultimate Gadget Laboratories Ultimate Hacking Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:1D50:6122.0002/input/input2
hid-generic 0003:1D50:6122.0002: input,hidraw1: USB HID v1.10 Keyboard [Ultimate Gadget Laboratories Ultimate Hacking Keyboard] on usb-0000:01:00.0-1.2.1/input1
input: Ultimate Gadget Laboratories Ultimate Hacking Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.2/0003:1D50:6122.0003/input/input3
usb 1-1.2.2: new high-speed USB device number 7 using xhci_hcd
hid-generic 0003:1D50:6122.0003: input,hidraw2: USB HID v1.10 Device [Ultimate Gadget Laboratories Ultimate Hacking Keyboard] on usb-0000:01:00.0-1.2.1/input2
input: Ultimate Gadget Laboratories Ultimate Hacking Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.3/0003:1D50:6122.0004/input/input4
hid-generic 0003:1D50:6122.0004: input,hidraw3: USB HID v1.10 Device [Ultimate Gadget Laboratories Ultimate Hacking Keyboard] on usb-0000:01:00.0-1.2.1/input3
input: Ultimate Gadget Laboratories Ultimate Hacking Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.4/0003:1D50:6122.0005/input/input5
hid-generic 0003:1D50:6122.0005: input,hidraw4: USB HID v1.10 Mouse [Ultimate Gadget Laboratories Ultimate Hacking Keyboard] on usb-0000:01:00.0-1.2.1/input4
fbcon: Taking over console
Console: switching to colour frame buffer device 160x45
usb 1-1.2.2: New USB device found, idVendor=1bcf, idProduct=2284, bcdDevice= 7.18
usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2: Product: Full HD webcam
usb 1-1.2.2: Manufacturer: AONI ELECTRONIC CO.
usb 1-1.2.2: SerialNumber: AN202007180003
usb 1-1.2.3: new full-speed USB device number 8 using xhci_hcd
usb 1-1.2.3: New USB device found, idVendor=0b33, idProduct=2000, bcdDevice= 0.03
usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.3: Product: Contour Receiver
usb 1-1.2.3: Manufacturer: Contour Design, inc.
usb 1-1.2.3: SerialNumber: 5EBAD4E9FC
input: Contour Design, inc. Contour Receiver as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/0003:0B33:2000.0006/input/input6
hid-generic 0003:0B33:2000.0006: input,hidraw5: USB HID v1.11 Keyboard [Contour Design, inc. Contour Receiver] on usb-0000:01:00.0-1.2.3/input0
input: Contour Design, inc. Contour Receiver Mouse as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.1/0003:0B33:2000.0007/input/input7
input: Contour Design, inc. Contour Receiver Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.1/0003:0B33:2000.0007/input/input8
input: Contour Design, inc. Contour Receiver Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.1/0003:0B33:2000.0007/input/input9
hid-generic 0003:0B33:2000.0007: input,hidraw6: USB HID v1.11 Mouse [Contour Design, inc. Contour Receiver] on usb-0000:01:00.0-1.2.3/input1
input: Contour Design, inc. Contour Receiver Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.2/0003:0B33:2000.0008/input/input10
input: Contour Design, inc. Contour Receiver System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.2/0003:0B33:2000.0008/input/input11
hid-generic 0003:0B33:2000.0008: input,hidraw7: USB HID v1.11 Device [Contour Design, inc. Contour Receiver] on usb-0000:01:00.0-1.2.3/input2
hid-generic 0003:0B33:2000.0009: hiddev1,hidraw8: USB HID v1.10 Device [Contour Design, inc. Contour Receiver] on usb-0000:01:00.0-1.2.3/input3
usb 1-1.2.4: new full-speed USB device number 9 using xhci_hcd
usb 1-1.2.4: New USB device found, idVendor=0909, idProduct=001c, bcdDevice= 1.00
usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.4: Product: AT2020USB+
usb 1-1.2.4: Manufacturer: audio-technica
input: audio-technica AT2020USB+ Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.3/0003:0909:001C.000A/input/input12
hid-generic 0003:0909:001C.000A: input,hiddev2,hidraw9: USB HID v1.00 Device [audio-technica AT2020USB+] on usb-0000:01:00.0-1.2.4/input3
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice Cryptsetup Units Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for authpass, revision 39...
systemd[1]: Mounting Mount unit for blender, revision 111...
systemd[1]: Mounting Mount unit for blender, revision 65...
systemd[1]: Mounting Mount unit for chromium, revision 1506...
systemd[1]: Mounting Mount unit for chromium, revision 1514...
systemd[1]: Mounting Mount unit for code, revision 57...
systemd[1]: Mounting Mount unit for code, revision 58...
systemd[1]: Mounting Mount unit for core, revision 10823...
systemd[1]: Mounting Mount unit for core, revision 10859...
systemd[1]: Mounting Mount unit for core18, revision 1944...
systemd[1]: Mounting Mount unit for core18, revision 1988...
systemd[1]: Mounting Mount unit for core20, revision 875...
systemd[1]: Mounting Mount unit for core20, revision 904...
systemd[1]: Mounting Mount unit for discord, revision 120...
systemd[1]: Mounting Mount unit for discord, revision 121...
systemd[1]: Mounting Mount unit for doctl, revision 454...
systemd[1]: Mounting Mount unit for doctl, revision 470...
systemd[1]: Mounting Mount unit for gimp, revision 322...
systemd[1]: Mounting Mount unit for gimp, revision 347...
systemd[1]: Mounting Mount unit for gitkraken, revision 171...
systemd[1]: Mounting Mount unit for gitkraken, revision 172...
systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 128...
systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 145...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 60...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 66...
systemd[1]: Mounting Mount unit for gog-galaxy-wine, revision 171...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1513...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1514...
systemd[1]: Mounting Mount unit for helm, revision 325...
systemd[1]: Mounting Mount unit for helm, revision 328...
systemd[1]: Mounting Mount unit for insomnia, revision 122...
systemd[1]: Mounting Mount unit for insomnia, revision 123...
systemd[1]: Mounting Mount unit for kde-frameworks-5-core18, revision 32...
systemd[1]: Mounting Mount unit for obs-studio, revision 1185...
systemd[1]: Mounting Mount unit for obs-studio, revision 1195...
systemd[1]: Mounting Mount unit for onlyoffice-desktopeditors, revision 60...
systemd[1]: Mounting Mount unit for onlyoffice-desktopeditors, revision 63...
systemd[1]: Mounting Mount unit for rustup, revision 617...
systemd[1]: Mounting Mount unit for snap-store, revision 498...
systemd[1]: Mounting Mount unit for snap-store, revision 518...
systemd[1]: Mounting Mount unit for snapd, revision 11036...
systemd[1]: Mounting Mount unit for snapd, revision 11107...
systemd[1]: Mounting Mount unit for spotify, revision 42...
systemd[1]: Mounting Mount unit for spotify, revision 43...
systemd[1]: Started Journal Service.
systemd-journald[910]: Received client request to flush runtime journal.
systemd-journald[910]: File /var/log/journal/0c2c5f8d518740189c9207aa5717f42c/system.journal corrupted or uncleanly shut down, renaming and replacing.
ccp 0000:0b:00.2: ccp enabled
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
mc: Linux media interface: v0.10
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
asus_wmi: ASUS WMI generic driver loaded
videodev: Linux video capture interface: v2.00
kvm: disabled by bios
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input14
usbcore: registered new interface driver btusb
usb 1-1.2.2: 3:1: cannot get freq at ep 0x86
snd_hda_intel 0000:0a:00.1: Force to non-snoop mode
kvm: disabled by bios
MCE: In-kernel MCE decoding enabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
snd_hda_intel 0000:0a:00.1: bound 0000:0a:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input15
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input16
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input17
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input18
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input19
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input20
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC2D0:    inputs:
snd_hda_codec_realtek hdaudioC2D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC2D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC2D0:      Line=0x1a
usb 1-1.2.2: 3:2: cannot get freq at ep 0x86
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card2/input21
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card2/input22
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card2/input23
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card2/input24
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card2/input25
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card2/input26
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card2/input27
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM: features 0x07
usb 1-1.2.2: 3:3: cannot get freq at ep 0x86
kvm: disabled by bios
Bluetooth: hci0: new-game-plus
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
Bluetooth: hci0: BCM: firmware Patch file not found, tried:
Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0b05-17cb.hcd'
Bluetooth: hci0: BCM: 'brcm/BCM-0b05-17cb.hcd'
Adding 999420k swap on /dev/mapper/vgubuntu-swap_1.  Priority:-2 extents:1 across:999420k SSFS
usb 1-1.2.2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
usb 1-1.2.2: [7] FU [Mic Capture Volume] ch = 1, val = 0/4096/1
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
kvm: disabled by bios
uvcvideo: Found UVC 1.00 device Full HD webcam (1bcf:2284)
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
kvm: disabled by bios
kvm: disabled by bios
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
kvm: disabled by bios
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Failed to query (GET_INFO) UVC control 12 on unit 1: -32 (exp. 1).
uvcvideo: Failed to query (GET_INFO) UVC control 14 on unit 1: -32 (exp. 1).
uvcvideo: Failed to query (GET_INFO) UVC control 15 on unit 1: -32 (exp. 1).
kvm: disabled by bios
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
uvcvideo: Failed to query (GET_INFO) UVC control 16 on unit 1: -32 (exp. 1).
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
input: Full HD webcam: Full HD webcam as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input28
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
kvm: disabled by bios
EDAC amd64: F17h detected (node 0).
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1615627086.630:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1813 comm="apparmor_parser"
audit: type=1400 audit(1615627086.630:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1818 comm="apparmor_parser"
audit: type=1400 audit(1615627086.630:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1818 comm="apparmor_parser"
audit: type=1400 audit(1615627086.630:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1817 comm="apparmor_parser"
audit: type=1400 audit(1615627086.630:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=1824 comm="apparmor_parser"
audit: type=1400 audit(1615627086.630:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1825 comm="apparmor_parser"
audit: type=1400 audit(1615627086.630:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1825 comm="apparmor_parser"
audit: type=1400 audit(1615627086.630:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1825 comm="apparmor_parser"
audit: type=1400 audit(1615627086.634:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1823 comm="apparmor_parser"
audit: type=1400 audit(1615627086.634:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1812 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered protocol family 38
[drm] Cannot allocate secure buffer since TMZ is disabled
rfkill: input handler disabled
igb 0000:03:00.0 enp3s0: igb: enp3s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler enabled
rfkill: input handler disabled
kauditd_printk_skb: 91 callbacks suppressed
audit: type=1400 audit(1615627097.522:103): apparmor="DENIED" operation="capable" profile="/snap/snapd/11107/usr/lib/snapd/snap-confine" pid=3449 comm="snap-confine" capability=4  capname="fsetid"
audit: type=1326 audit(1615627099.018:104): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=3449 comm="snap-store" exe="/snap/snap-store/518/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f8a94837639 code=0x50000
audit: type=1107 audit(1615627099.258:105): pid=1921 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/NetworkManager" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.13" pid=3449 label="snap.snap-store.ubuntu-software" peer_pid=1923 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1107 audit(1615627099.894:106): pid=1921 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.11" pid=3449 label="snap.snap-store.ubuntu-software" peer_pid=1944 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1107 audit(1615627099.894:107): pid=1921 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.11" pid=3449 label="snap.snap-store.ubuntu-software" peer_pid=1944 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1107 audit(1615627099.914:108): pid=1921 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.11" pid=3449 label="snap.snap-store.ubuntu-software" peer_pid=1944 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1107 audit(1615627099.914:109): pid=1921 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.11" pid=3449 label="snap.snap-store.ubuntu-software" peer_pid=1944 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1400 audit(1615627100.178:110): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=3449 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1615627107.366:111): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/lib/steam/steam.desktop" pid=3449 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1615627107.366:112): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=3449 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1615627107.390:113): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/lib/steam/steam.desktop" pid=3449 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1615627107.390:114): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=3449 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1326 audit(1615627107.758:115): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=3449 comm="pool-org.gnome." exe="/snap/snap-store/518/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f8a9482d4e7 code=0x50000
audit: type=1326 audit(1615627402.118:116): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=13914 comm="snap-store" exe="/snap/snap-store/518/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7fc1637d8639 code=0x50000
audit: type=1400 audit(1615627406.814:117): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/lib/steam/steam.desktop" pid=3449 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1615627406.818:118): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=3449 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1615627406.842:119): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/lib/steam/steam.desktop" pid=3449 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1615627406.842:120): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=3449 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1326 audit(1615627407.254:121): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=3449 comm="pool-org.gnome." exe="/snap/snap-store/518/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f8a9482d4e7 code=0x50000

Return To AMD Ryzen 5 2600X Six-Core System Information